So you've purchased a pair of pretty silk stockings from my shop, and you love them, but perhaps they are a little big in the foot, or you would like to add some back seams for a more historically accurate look. Here's how...

Removing Excess Footage From Your Silk Stockings

1.Put your stockings on inside out, placing the heel of the stocking on your heel, so the extra is in the toe.

American Duchess Historic Shoes Blog

2. Pinch the excess at the toe and pin.

3. With a ball-point needle and a knit-appropriate stitch, sew across the toe of your stocking, making sure *not* to pull as it goes through the machine.

American Duchess Historic Shoes Blog

4. Cut off the excess, turn right-side out, and revel in the glory of stockings that now fit perfectly.
American Duchess Historic Shoes Blog

American Duchess Historic Shoes Blog

How To Add Seams To Your Stockings

1. Lay your stockings out flat, as shown. Pin if needed.

American Duchess Historic Shoes Blog

2. Straight stitch along the back of the stocking, from the top of the heel to just below the band. Stitch as closely as you possibly can to the edge. Use a ball-point needle, and do *not* pull through, just let the feed dogs on your machine feed the stocking through.

*If you want your seam smooth on the outside, turn your stockings inside out, and stitch, so the perl is on the inside.
American Duchess Historic Shoes Blog

There ya go! Perfectly fitting, perfectly period silk stockings. :-)

Don't have a pair of AD silk clocked stockings? You can get them in 3 colors at www.American-Duchess.com:

American Duchess Historic Shoes Blog


American Duchess