Trimming the bodice - the left side was done with the roll hem foot and it really "ate" the fabric - the right with a different method. I will need to remove the left side and re-do it. |
The Creature requires much time, much fiddling, much hand work. I've finally worked out a good way to hem the organza on the machine, but it's still hours of tearing, trimming, folding, stitching, pleating, pinning, tacking, and pressing.
Thankfully it's also rewarding!
Knife pleats on the skirt. These are tighter than I ended up doing overall. |
But what a gown it will be!
As you can see, compared to the last post, both sleeves are on, and I've added an extension with more organza to one so far. The petticoat has been pleated and trimmed, but I have yet to do the waistband and ties. Then it was on to the trim - many strips of organza hemmed on both sides, then knife pleated and loosely stitched to the bodice and skirt.
Polonaise effect - Left is down; middle is drawn up with interior tapes; right is drawn up with exterior tapes, and is the method I will be using. |
I usually prefer the interior tapes, to create the "butterfly" effect, but to achieve that 1770s Polonaise poofery I admire on fashion plates of the era, I have to use the exterior tapes. I better go find some pretty cord. :-)
Skirts drawn up with exterior tapes - this creates the distinct three sections the style was named for, plus that quite large poof extending out the back. The interior tapes create a totally different silhouette. |